Why to choose nfs over vboxsf for mounting host folders inside a VirtualBox VM!

Simple answer: SPEED

Long answer:

Most projects I work on a the moment are web related and I like my development environment to be as close to production as possible.

Therefore I set up a Debian Jessie some time ago and mounted my whole /Users/cb0/Sites directory into the VM. So I configured the shared folders inside the VirtualBox and used this code inside /etc/fstab inside the Debian.

Sites /Users/cb0/Sites vboxsf defaults,rw,uid=33,gid=33 0 0

This worked fine for custom php apps and even for symfony 1.4. Now I’m working on a symfony 2 project which seems to generate a whole bunch of cache files before starting to deliver the webpage.

This resulted in an average load time of 45s (yes seconds) which I could not bear for more than 2 pageloads. So I search for the bottleneck and found out that the creation of the cache files took too long. After reading some documentations I decided to try to mount the share over nfs instead of the vboxsf.

Here’s how to do it:

1. [Host] Create or open the file “/etc/nfs.conf” and insert the following line:

nfs.server.mount.require_resv_port = 0

2. [Host] Edit the /etc/exports file and configure your desired share folder like this:

/Users/cb0/Sites -mapall=501:20 -network -mask

Replace “192.168.56” with the address you have chosen for your Host-only Adapter.

3. [Host] Run the following 3 commands:

> sudo nfsd update
> sudo nfsd checkexports
> showmount -e

The ‘showmount’ command will output something like this if everything went fine:

# Exports list on localhost:

4. [GUEST] Install necessary software. (As mentioned I use debian jessie)

sudo apt-get install nfs-common

5. [GUEST] Add the mount infos into the file /etc/fstab /Users/cb0/Sites nfs soft,intr,rsize=8192,wsize=8192 0 0

This tells debian to mount the directory /Users/cb0/Sites located on my host machine into the exactly same directory on my linux. (Note: You have to create the folder inside the guest first.) I do this for convenience, you could mount it somewhere else.

6. [GUEST] Now mount this share.

sudo mount /Users/cb0/Sites

and you are done.

After these simple steps and no other tuning my sf2 web project load in about 580ms. This is more than 70times faster than before.
I also noticed a small speedup in my other web apps. Now I can relax, sit back and continue my work on this project.

FOSUserBundle customization notes


I’ve been busy creating a new project in which I use symfony2 for the first time. Working with symfony1.x for nearly 3 years I really like some of the ideas of symfony2. However there are also some things I dislike, or just don’t fully understand yet.

Here are some quick notes I took while reading the FOSBundle Documentation.


Default Templates

The easy and quick way:

  • Basically override the FOS Template by creating a file under ‘./app/Resources/FOSUserBundle/views/layout.html.twig’
  • Be sure to include this block, which will hold the FOSUserBundle Content.¬†
{% block fos_user_content %}
{% endblock fos_user_content %}

2. The more complicated way